Folding Tents - Setup instructions

Our folding tents are not only of the highest quality, but are also characterized by their simple and quick construction. The tent system is ready for use within a minute. The following folding tent assembly instructions are intended to provide a visual understanding of the assembly. Ideally, 2 people should be available for assembly and disassembly.

Step 1: Unpack the folding tent frame from the transport bag and place it on the metal feet.

Step 2: Stand in the middle of the short sides of the folding tent. Grip the metal scissors with both hands on the left and right of the middle. Now you have to pull back and lift at the same time so that the frame slowly unfolds. Pull the frame apart about two thirds.

Step 3: Now take the roof of the folding tent and place it over the folding tent frame. The corners of the roof should fit the corners of the frame. Now fix the corners of the roof with the inner Velcro loops on the frame and the roof tips with the fastening cords.

Step 4: Now stand in front of the short sides of the folding tent and pull the folding tent frame as far apart as possible. You then have to push up the corner and center gliders until they snap into place. When dismantling, you have to pull the metal ring out of the latch so that the corner and center gliders slide back again and the folding tent can be folded up again.

Step 5: The roof of the folding tent should be stretched at this point. Now extend the corner feet to the full length, on one side at the same time. Repeat this process on the other side. In the case of folding tents with 6 feet, the middle feet are only extended when the corners are already extended. Finally, you should now tension all the valance tensioners from the inside so that the surface of the valance becomes as smooth as possible.

Step 6: Now you can equip your folding tent with side parts and various accessories. Please note the prevailing weather conditions and fix your folding tent accordingly.

We wish you success with your high quality folding tent!

Info: In the event that the roof of the folding tent should remain on the frame when dismantling, only step 3 does not have to be carried out during dismantling.

Further information on our premium folding tents / professional folding pavilions: