Folding Tent 3x3 Rental

Our folding tents are not only of the highest quality, but are also characterized by their simple and quick assembly. The tent system is ready for use within a minute. The following folding tent assembly instructions are intended to provide a visual understanding of the assembly process. Ideally, 2 people should be available for assembly and dismantling.

Step 1: Unpack the folding tent frame from the transport bag and place it on the metal feet.

Step 2: Stand in the middle of the short sides of the folding tent. Grab the metal scissors with both hands on the left and right of the center. Now you have to pull back and lift at the same time so that the frame slowly unfolds. Pull the frame apart about two thirds.

Step 3: Now take the roof of the folding tent and place it over the folding tent frame. The corners of the roof should match the corners of the frame. Now fix the corners of the roof with the inner Velcro loops on the frame and the roof tips with the fastening cords.

Step 4: Now stand in front of the short sides of the folding tent again and pull the folding tent frame apart as far as possible. Then you have to push up the corner and middle gliders until they click into place. When dismantling, you have to pull the metal ring out of the engagement so that the corner and middle gliders slide back and the folding tent can be folded up again.

Step 5: At this point the roof of the folding tent should be stretched. Now extend the corner feet, at the same time on one side, to the full length. Repeat this process on the other side. In folding tents with 6 feet, the center feet are only extended when the corners have already been extended. Finally, you should now tighten all valance tensioners from the inside so that the surface of the valance is as smooth as possible.

Step 6: Now you can equip your folding tent with side panels and various accessories. Please note the prevailing weather conditions and fix your folding tent accordingly.